Arduino USB control Smart Home

(  Test to Control LED Strips )



Arduino USB control Smart Home

with Arduino Firmata

System Diagram

Hardware

1. Arduino Board or compatible Board.
2. Relay Board
3. USB-OTG Cable ( Female A to Micro A )
4. USB Cable ( A to B Male/Male )

Development Kits on ebay

http://www.ebay.com/sch/marychanyanuch2012/m.html?

Wiring Diagram

Arduino Pin 22 to Relay CH.1
Arduino Pin 23 to Relay CH.2
Arduino Pin 24 to Relay CH.3
Arduino Pin 25 to Relay CH.4
Arduino Pin 26 to Relay CH.5
Arduino Pin 27 to Relay CH.6
Arduino Pin 28 to Relay CH.7
Arduino Pin 29 to Relay CH.8

You can change Arduino Pin by Setting Arduino Pin

 

Software

Arduino Code use  Firmata Library.

How to program Firmata code to Arduino Board
http://microcontrollerkits.blogspot.com/2014/12/arduino-usb-control-with-firmata.html

Android App on Google Play

Download App on Google Play
https://play.google.com/store/apps/details?id=arduino.control.firmata

 

Smart Home Automation Model 



Android USB Firmata Sample Code


My Blog

Raspberry Pi Project



My Website
http://softpowergroup.net/
email : info@softpowergroup.net   Tel .081-6452400
Google+  https://plus.google.com/+SoftpowergroupNetThailand/

Raspberry Pi Smart Home Control

New Version Test  ( 15 Jan 2015 )


Raspberry Pi  - Smart Home Control ระบบควบคุมบ้านอัฉริยะ
Make Smart Home Automation and Control  Devices with Raspberry Pi Board and Arduino Board.
Control on Web Browser.


System Diagram

Hardware Devices
1.Raspberry Pi Board  + OpenWRT Boot Loader SD Card
2.Arduino UNO Board or Compatible Board
3.Relay Board
and WiFi Router with LAN Cable ,Power Supply for Raspberry Pi and Arduino Board



Wiring Diagram
Raspberry Pi Board connect to Arduino Board with Serial Communication TTL UART Port ( Rx , Tx )
If your Arduino Board use 5 Volt Supply must need level converter to Raspberry Pi Board ( Raspberry Pi board use 3 V. )
But Arduino Board use 3.3 V so, don't need use level converter.
Use Arduino Pin 0,1

Level converter use Resistor 270 ohm and 470 ohm ( 2.7K and 4.7K )

Level converter use Level Converter Module

Arduino Board to Relay Board use Digital output pin 2 - 9
But your change to other pin you want.

Software
1. OpenWRT embedded Software to create Web Server.
2. Python
3. JavaScript
4.Arduino - Python Command API by thearn ( For Arduino Board )


Raspberry Pi Web Server

Responsive Web Design

Arduino Output Pin Setting on Web Server
and Change Device Name.

Open WRT Admin

NEXT PROJECT

http://softpowergroup.net/

email : info@softpowergroup.net   Tel .081-6452400

Google+  https://plus.google.com/+SoftpowergroupNetThailand/

App on Google Play

https://play.google.com/store/apps/developer?id=Amphan

https://play.google.com/store/apps/developer?id=Digital2u.net

My Blog

Android Arduino Control Hardware

Android Code Example

Android Studio Development

Arduino Smart Home Automation

Arduino Smart Home Automation

Open Source Arduino Smart Home Automation

System Diagram

Hardware Feature

•         8 Digital Output Control
•         4 Analog Input Sensor
•         Control via TCP/IP or Internet
•         Control with Web Browser or Android App

Software Feature

•          Arduino Web Server TCP/IP ( LAN )
•          Set your device name and sensor name
•          Sensor Control Output Automatically.
•          Set your IP Address and port
•         Real time status

Hardware Device

1.         Arduino MEGA Board or compatible board.
2.     Ethernet (WIZnet 5100) Shield
3.     Relay Board
4.     Light Sensor or Motion Sensor or other

Development Kits on ebay
http://www.ebay.com/sch/marychanyanuch2012/m.html?

Wiring Diagram

Device1  Arduino Output PIN 2

Device2  Arduino Output PIN 3

Device3  Arduino Output PIN 4

Device4  Arduino Output PIN 5

Device5  Arduino Output PIN 6

Device6  Arduino Output PIN 7

Device7  Arduino Output PIN 8

Device8  Arduino Output PIN 9

Analog Input Sensor1   -  Arduino PIN A0  to Control Output 5

Analog Input Sensor2   -  Arduino PIN A1  to Control Output 6

Analog Input Sensor3   -  Arduino PIN A2  to Control Output 7

Analog Input Sensor4   -  Arduino PIN A3  to Control Output 8

Android App. ( Free Version ) 

https://play.google.com/store/apps/details?id=arduino.smarthome.automation

Control With Web Browser

If you don’t want use android app. You can control with Web Browser also.

or Web Browser on Mobile Device.

Arduino WebServer Source Code

http://www.softpowergroup.net/files/Arduino/WebServerControl.zip


Code for Active Low Relay Output

http://www.softpowergroup.net/files/Arduino/WebServerControl_ActiveLow.zip


Original Code

http://arduino.cc/en/Tutorial/WebServer

Mirror Site : http://android-arduinocontrol.blogspot.com/2014/08/android-arduino-smart-home-automation.html

Install and Testing in Home

Some Problem about IP Address
I use TP-Link Wireless Router so it give gateway  to 192.168.0.1 

Then I use IP Address for Arduino Code to 192.168.0.199 


IF YOUR GATEWAY NOT THE SAME MY GATEWAY.

YOU NEED CHANGE YOUR ARDUINO CODE For IP ADDRESS.

see below...

#include <SPI.h>

#include <Ethernet.h>

// Define measurement variables

float amplitude_current;

float effective_value;

float effective_voltage = 230; // Set voltage to 230V (Europe) or 110V (US)

float effective_power;

float zero_sensor;

// Variables to be exposed to the API

int power;

// Enter a MAC address and IP address for your controller below.

// The IP address will be dependent on your local network:

byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x2D };

byte gateway[] = { 192, 168, 0, 1 };              //   Your Gateway          

byte subnet[] = { 255, 255, 255, 0 }; //             

IPAddress  ip(192,168,0,199);                       // Your IP Address 

My Website
http://softpowergroup.net/
email : info@softpowergroup.net   Tel .081-6452400
Google+  https://plus.google.com/+SoftpowergroupNetThailand/

My Blog

Raspberry Pi Project

Arduino Control RGB LEDs via Bluetooth

Diagram

Arduino Control RGB LEDs via Bluetooth.

( ควบคุม หลอดไฟ RGB LEDs ด้วย Android + Arduino + Bluetooth )

This App need connect to Arduino Board then control RGB LEDs via Bluetooth Connection.

Use Android Bluetooth to control. Then need enable Bluetooth setting.

The Application Features

•          Control Color for RGB LEDs. ( via Bluetooth connection )
•          Blink Function and can adjust timing to blink.
•          Fading Function and can adjust timing to fading.
•          When Bluetooth not connect to Arduino Board – User Interface Disable.
•          When Bluetooth connected – User Interface Enable.
•          Free Version with Ad.

Hardware

1.Arduino Board or compatible Board 

2.Serial Bluetooth Module.( TTL Output )

3.RGB LEDs  ( We use SPNovaLED model NMRTB-USD-AAB+ADE+Y2Z1-1 )

4.Android Device with Bluetooth Supported.

Software
Arduino Code ( You need to program into Arduino Board. )

Visit Hardware page ( USB Version )
http://microcontrollerkits.blogspot.com/2013/06/arduino-control-rgb-led-via-serial-port.html 

          

For more detail about Arduino Programming http://arduino.cc/en/

*** Code for Arduino for Bluetooth version, the same USB Version ***

 
  Android App.



https://play.google.com/store/apps/details?id=arduino.bluetooth.rgbleds

Download Arduino Control RGB LEDs via Bluetooth  on Google Play.
https://play.google.com/store/apps/details?id=arduino.bluetooth.rgbleds

Wiring Diagram in common-cathode.
If you want use in common-anode.Need change wiring and edit some arduino code.

Wiring Diagram and Hardware page ( USB Version )

Pls. visit in more detail.
http://microcontrollerkits.blogspot.com/2013/06/arduino-control-rgb-led-via-serial-port.html


About App.

• Open App then connect to bluetooth.

      

• Paired Bluetooth Device.

         If you are not pair bluetooth device yet. SCAN for devices first.
         Paired device already. Select name of bluetooth module to connect.

•       Bluetooth Connected already. 

•       Other Menu - Hardware Diagram - About Developer.

   For Android Control RGB LEDs (USB Version)

https://play.google.com/store/apps/details?id=arduino.control.rgbleds

     http://androidcontrol.blogspot.com/2013/06/android-arduino-control-rgb-led.html